Efficient Homebrewing: How to Clean Keg Beer Lines

Introduction

When using a kegging system at home, it's important that beer lines are kept clean to ensure no infections or off flavours develop within the lines themselves. One of the problems many home brewers face when cleaning lines is they need to waste alot of gas - filling a 19L keg with cleaning solution then pressuring it to force the cleaning solution through the beer lines is inefficient - requiring alot of water and gas to do so.

In this post we'll outline the process we use - which requires a couple of (cheap) extra parts, but makes it much quicker and more efficient to get your beer lines cleaned.

What You'll Need

• Your beer line(s) with a liquid disconnect on at least one end

• An empty soft drink bottle (with standard 'coke style' PCO 1881 style thread)

• A PCO 1881 carbonation cap tee piece (available from Kegland - here)

• A short piece of silicone tubing to use as a dip tube in the empty soft drink bottle

• 2 x carbonation caps (available from Kegland - here)

• A CO2 gas cylinder with regulator and gas disconnect

Step-by-Step Process

1. Prepare the Soft Drink Bottle

The PCO 1881 carbonation cap tee piece can convert any soft drink bottle with a compatible screw thread into a mini keg. Fill the bottle with cleaning solution and attach the carbonation cap tee piece.

2. Attach the Dip Tube

One of the carbonation caps on the tee piece will have the silicone hose attached as a dip tube. The other carbonation cap will be used to attach gas to pressurize the bottle.

3. Connect the Beer Line

Connect the beer line you wish to clean onto the top carbonation cap (the one with the dip tube attached).

4. Pressurize the Bottle

Connect your CO2 gas to the other carbonation cap and add pressure. You won't need a lot—5 psi should be sufficient. Once fully assembled, it should look like the picture below.

Easy beer line cleaning solution - fully assembled

5. Clean the Beer Line

If the other end of your liquid line has a disconnect, depress the poppet with your finger to allow the liquid to flow through. If you don't have a disconnect, the gas will start forcing the liquid out through the line as soon as you attach it, cleaning the line in the process.

Additional Tips

Separate Bottles for Different Solutions

Given the low cost of the equipment, you can easily set up separate bottles for cleaning (using PBW), sanitizing (using StarSan or StellaSan), and rinsing (using plain water). Simply change the gas and liquid disconnects over to each bottle as needed.

Efficiency and Cost-Effectiveness

This method is much quicker, easier, and uses less gas to pressurize a small soft drink bottle compared to a full size keg.

Conclusion

This is just one of many ways that you can cheaply and effectively clear the beer lines for your keg system.

How do you clean your beer lines? Leave a comment below and let us know!

Related Articles

The Current State of Homebrewing: A Hobby in Flux

Homebrewing, the age-old practice of crafting beer at home, has experienced significant shifts over the past few years. While some enthusiasts argue that the hobby is in decline, others highlight the unprecedented access to advanced technology and more affordable equipment that makes homebrewing more accessible and enjoyable than ever. Let's delve into the current state of homebrewing, examining the factors contributing to its perceived decline and the counterarguments showcasing its resilience and growth.

How to Check & Test CO2 Gas Lines for Leaks: A Comprehensive Guide

One of the greatest fears for many home brewers using CO2 tanks and kegs for carbonating and dispensing their beer is the possibility of a leak in their gas lines. Even the tiniest of leaks can empty a full CO2 bottle overnight, causing unnecessary inconvenience and expense.

Exploring the LalBrew Pomona Yeast Strain by Lallemand

When it comes to brewing modern hop-forward beers, the choice of yeast can make a significant difference in the final product. One such yeast strain that has been making waves in the brewing community is LalBrew Pomona by Lallemand. Named after the Roman goddess of fruit trees, this hybrid yeast strain is celebrated for its unique flavor profile and robust fermentation performance. Let's dive into the details of what makes LalBrew Pomona a game-changer for brewers.

Understanding Acetaldehyde: The Green Apple Off-Flavor in Beer

Acetaldehyde is one of the most common off-flavors encountered in beer, often described as having a green apple or freshly cut pumpkin aroma and taste. In this article we will delve into the causes, prevention, and remedies for acetaldehyde, as well as how to identify it in your own brews.

Essential Brewzilla Accessories: Tips and Tricks for a Perfect Brew Day

If you're a proud BrewZilla owner like us, you know how versatile and efficient this brewing system can be. After many brews and countless hours of research, we've compiled a list of essential accessories and tips to enhance your BrewZilla experience.

How to Perform a Closed Transfer from Fermenter to Keg: A Step-by-Step Guide for Homebrewers

Introduction to Closed Transfer in Homebrewing

Closed transfer is a crucial technique in homebrewing that ensures your beer remains free from contamination and oxidation. This guide will walk you through the process of transferring your brew from the fermenter to the keg while maintaining its quality.

The Ultimate Guide to Grain Crush Size for BrewZilla Brewing

In order to ensure complete control over your recipe, efficiency and brewing system, you really need to be crushing your own malted grains. After several years of brewing on our 35L BrewZilla 3.1.1 using pre-milled grains from our local home brew shop, we decided to invest in a grain mill and begin crushing our own grains for each recipe and brew day. This lead us to the question as to what the ideal crush size is to use on a BrewZilla system?

Juice Boost 2.0 - Hazy IPA - Tasting Results/Review

Our second iteration of the Juice Boost Hazy IPA (previously NEIPA) with a slightly tweaked grain bill and hop schedule compared to the original. It's a decent hazy in our opinion, but there's still some things we'll look at tweaking for version 3...

Redemption - West Coast IPA - BrewZilla Brew Day

Read on to see all the details about our latest brew day on our 35L BrewZilla 3.1.1 where we brought our Redemption West Coast IPA recipe to life.

Keg King - Malt King - Geared 3 Roller Grain Mill - Adjusting Gap Size

We've assembled our grain mill, so the next step is to go ahead and adjust the rollers to the required gap size. Adjusting the gap size is important as it effects how the grain is crushed. A smaller gap will lead to a finer crush, which can help with conversion of starches to sugar, but can cause issues with recirculation or sparging, since the water is not able to flow through the grain bed as easily. Conversely, a larger gap will give a coarser crush, which can aid in water flow through the grain bed, but can lead to decreased conversion of starches to sugar (ie. efficiency). Finding the sweet spot for your brewing system is key, and like most things, setting the gap size is pretty easy once you know how to do it. The provided instructions with the grain mill certainly lack the kind of detail you need to do it properly. Read on for some detailed steps on how we did it.

Cerveza Piñata - Mexican Lager - Tasting Results/Review

Our second attempt at a Mexican Lager and we're very pleased with how this one turned out. A new recipe and new yeast variety helps to keep things interesting, and makes it all the more satisfying when it turns out well.

KegLand - RAPT Pill Wireless Charging Kit - Review

 

We've had our RAPT Pill for quite some time now - after purchasing it back in early 2022, not too long after they were initially released by KegLand. The wireless upgrade kit has been available for some time now, and we finally got around to ordering one and fitting it to our Pill - read on to see what we think.

Keg King - Malt King - Geared 3 Roller Grain Mill - Assembly

The next step in our homebrewing journey is to take the plunge into milling our own grains. We opted for the Malt King from Keg King - a geared 3 roller grain mill that comes with a nice steel mounting board and saves us having to muck around creating our mounting board from timber. We recently went through the assembly so figured we'd document our experience.

KegLand - Blunderberg Ginger Beer Kit - Review

We often like to have a beer alternative on tap and we recently tried KegLand's Blunderberg Ginger Beer kit. It's essentially a glorified cordial, requiring some flavour "shot" concentrates to be mixed with water, sugar and another additive to prevent it from fermenting.